Operation and maintenance News

It is not very often that a product released is capable to make a complicated task really easy and improve safety at the same time. MariTeam has introduced the OSW smartFit clamp shells – the ultimate solution for hassle-free hose coupling integration. With just three simple steps, users can securely and efficiently join their hoses and couplings, without the need for any additional tools or equipment, except for an Allen key. OSW smartFit binding system With its sleek design and user-f...

A total of 7 distressed workers have been saved by the prompt response of the Nigerian Maritime Administration and Safety Agency (NIMASA), following a distress call to the Director General, Dr. Bashir Jamoh OFR. The call, which came in at about 11.30 pm on February 2, 2023, from the Safety Officer on MT ALIMA vessel reported that while cleaning the tanks of the vessel by a private cleaning company, 8 of the cleaners developed complications due to insufficient oxygen available in the tank to sus...

Guests aboard Fred. Olsen Cruise Lines’ fleet made more than 4,400 wildlife sightings with the help of marine wildlife charity - ORCA in 2022. It came as part of ORCA’s Cruise Conservationist programme, hosted aboard the Fred. Olsen Cruise Lines’ fleet. The most frequent wildlife spotted was the common dolphin, sighted 296 times - with the total number of individual dolphins spotted being 1,996. Other sightings included humpback whales, orca, a blue whale and even the deepest...

While the EEXI is a one-off design-focused protocol granting a ticket to trade for existing ships, the CII as a measure of operational energy efficiency is the primary mechanism to reduce emissions going forward. Based on Annual Efficiency Ratio (AER) results, vessels will be awarded CII ratings ranging from A to E. The calculation essentially divides annual Fuel Oil Consumption (FOC) by distance travelled, taking into account the CO2 factor of the fuel used (100% in the case of fossil fuel oil...

Wilhelmsen has announced the release of its UNITOR IW-PRO 1/2" Mini NG Kit. The UNITOR IW-PRO 1/2" Mini NG Kit is a lightweight and versatile impact wrench used for tight corners and difficult to reach areas. It comes with a selection of impact sockets for onboard use. Product information It meets all the requirements expected of a UNITOR tool with the quality expectations and the reliability for the everyday use, onboard a vessel. This is a tool recognised and appreciated by professionals w...

The Milford Haven Waterway Future Energy Cluster, representing the UK's energy capital, has outlined a vision for a low carbon future at the Senedd in Cardiff Bay. The Cluster – a coalition of energy companies, renewable developers, green technology innovators, Pembrokeshire County Council and the Port of Milford Haven – outlined how their plans will play a pivotal role in enhancing the wellbeing of future generations and in helping the Welsh Government achieve a just transition to...

DNV, the global independent energy expert and assurance provider, was engaged by Ocyan as independent third party in the qualification process of a system injecting hydrogen as an additive in the internal combustion engines of drilling rigs, in order to reduce diesel consumption and greenhouse gas (GHG) emissions from drilling. DNV’s technology qualification process will ensure that the technology achieves the expected degree of maturity, following provisions in DNV-RP-A203 – which...

Global safety equipment manufacturer and supplier - Survitec will demonstrate a range of Maritime Defence equipment, including boats and personal protective equipment (PPE), with live waterborne displays at DSEI 2021 from 14th – 17th September 2021 at Excel, London, United Kingdom (UK). The demonstration will feature a number of new additions from Survitec, including the Marin Life Jacket, their newest defence life jacket, which fully integrates to any body armour, which is important not...

Gard is happy to announce that they have entered into partnerships with the Global Centre for Maritime Decarbonisation (GCMD) in Singapore and Mærsk Mc-Kinney Møller Center for Zero Carbon Shipping in Denmark. As decarbonisation transforms the maritime industries, ship owners will increasingly have to convert their operations to alternative fuels and low-carbon technologies, exposing them to new risks and operational challenges. As a leading marine insurer, Gard wants to support t...

Propspeed, an innovator of underwater foul-release coatings, announced its attendance at WorkBoat together with CMP. The combination of Propspeed’s expertise in foul-release coatings and CMP’s experience in corrosion control results in the best underwater protection for marine craft. Together they offer the commercial marine industry convenient and reliable access to an unrivaled product range. Customers can trust that these products meet their propulsion performance and corrosion p...

As the maritime industry is undergoing major transformations driven by the twin ambitions of carbon emissions reduction and digitalisation, the MOU seeks to enable close cooperation between ship owner and charterer with the aim of achieving further energy efficiencies and GHG savings through improved voyage data collection, verification and sharing via DNV’s Veracity data platform in collaboration with the industry partners’ digital management systems. With tightening environmental...

Air Products and Mabanaft, through its subsidiary Oiltanking Deutschland, announced their intention to build Germany's first large-scale, green energy import terminal in the Port of Hamburg. This joint development agreement is an important step towards the development of a green ammonia import and distribution infrastructure in the Port of Hamburg. The project was announced at a ceremony in Hamburg, which was supported by German Federal Minister for Economic Affairs and Climate Action Robert...

‘Ultimate protection for flight crews operating in cold climates’ - that’s the premise of global Survival Technology solutions provider - Survitec’s upgraded multi-platform, Cold Weather Protection Ensemble, which debuted at the SAFE Association’s annual symposium in Mobile, Alabama, USA. Based on the Survival Technology company’s existing flight coverall, the upgrade includes a new high-insulation base layer, delivering an improved level of thermal protectio...

Global Survival Technology provider - Survitec has been awarded a contract by Lockheed Martin to develop new flight equipment, as part of a capability upgrade for the mission proven F-16 in service with air forces worldwide. Survitec will leverage its 70 years of experience in the design and certification of high-performance functional garments to meet the safety and comfort needs of pilots operating the latest and most advanced F-16 configuration. F-16 Aircrew Flight Equipment The F-16 Aircr...

Wind power is one of the fastest-growing forms of renewable energy. Global demand for power from offshore wind farms is expected to change the way offshore operators and transfer providers consider workforce safety and how they procure critical Personal Protective Equipment (PPE). Survitec HeliPPE In the white paper exploring subscription-based rental and the future of offshore PPE, Survitec HeliPPE, the trusted PPE rental brand to the offshore wind industry, highlights how digital capabilitie...

Sleek, sustainable, and striking, the recent development by Haslob Kruse + Partners fuses past and present with an expansive wooden exterior made with the sustainable pioneer, Kebony wood, which was selected to house over 60,000 precious maritime artefacts at Germany’s National Maritime Museum in Bremerhaven. Clad entirely in sustainably sourced Kebony Character wood and containing 2,300 square metres of depot space, the German Maritime Museum houses an extensive collection...

Neste has been selected as a finalist in the contest for the German Sustainability Award for companies 2023. With its ambitious sustainability vision and renewable solutions for the aviation industry, road transport, and polymers and chemicals, Neste was nominated for the final round. The winner will be announced and awarded at ceremonies taking place in Düsseldorf, Germany, on December 1 and 2. German Sustainability Award The German Sustainability Award recognises companies th...

Propspeed, an innovator of underwater foul-release coatings, announced it has hired Chris Myers as Vice President of Sales Americas. In his new position, Myers is tasked with directing Propspeed’s sales efforts across the Americas, as well as growing and supporting Propspeed’s network of partner boat yards, marinas, applicators, and distributors. Customer service  “I am so excited to be joining the Propspeed team,” said Myers. “This team is driven by a pas...

Tokyo-based ClassNK has approved the Condition Based Maintenance (CBM) scheme for the main diesel engine on coal carrier - Noshiro Maru owned by Nippon Yusen Kabushiki Kaisha (NYK Line). From safe operation and operational cost reduction perspectives, Condition Based Maintenance (CBM) has been attracting more attention. ClassNK publishes CBM Guidelines ClassNK has developed rules for the adoption of CBM in class maintenance surveys ClassNK has developed rules for the adoption of CBM in class...

The frequency of container losses at sea has been a problematic and very costly issue for the industry over the years. According to the World Shipping Council 2019 report, there is an average of 1,382 containers lost at sea yearly. Whilst these figures are small in comparison to the number of containers being transported annually, container stack collapses still pose a significant risk to the industry, both in terms of claims and potential environmental impacts. Potential environmental impac...

The electrification of HHLA Container Terminal Altenwerder (CTA) is entering its final round. In the future, the tractor units deployed on the journeys between block storage and the container rail terminal or the empty depot will be driven by battery power. In order to further reduce CO₂ emissions at CTA, seven new battery-powered tractor units have been ordered and will replace the previously used equipment that runs on diesel. This terminal process will therefore emit no CO₂, nitrogen oxide o...

The 51st annual Newport International Boat Show (NIBS) held from September 15th – 18th welcomed thousands of visitors, with the greatest increase in visitor numbers in over a decade. Amidst a busy boat show season, Propspeed attended the 51st annual Newport International Boat Show (NIBS), held on the downtown waterfront of Newport, Rhode Island, from September 15th – 18th. Newport International Boat Show NIBS spans over 13 acres of historic downtown Newport and is one of...

Propspeed, the globally renowned innovator of underwater foul-release coatings, has announced that Propspeed has been proven to make vessels more fuel efficient, improve performance and offset fuel costs. Several Propspeed customers have monitored their performance data, before applying Propspeed and after, and have shared that information back to the company. Demand for fuel-efficient vessels “Seeing how shockingly high fuel costs these days are, boaters are looking for any way to make...

Diesel is the fuel of choice for a range of products including generator sets and engines used in marine, rail and construction and mining equipment, but there are alternatives. With concerns about the climate rising, businesses, shareholders and lawmakers are looking at replacement options for diesel in vehicles and power generation applications. Emission reductions across alternative fuels should also be considered when making a selection. Reasons for popularity Diesel has been the fuel of...

The New Zealand coastguard Mana's recently put their new rescue vessel in use. A repurposed Rayglass Protector, previously used as a supporter boat during America's Cup, is now a part of the rescue fleet in Cook Strait, NZ. With the coastguards' big focus on sustainability and safety, OXE Diesel was an obvious choice when it came to powering their new vessel. With twin OXE300's on the transom, there was no need to compromise on low emissions, range or safety. "This new vessel we’re receiv...

Thordon Bearings’ Egyptian distributor and integrated services provider Nefertiti Marine has successfully commissioned the water-lubricated Thordon SXL propeller shaft bearings installed aboard the 24,112gt ferry Daleela. The 1991-built, 400-passenger capacity RoPax, owned by El-Etehad International and chartered to Scandro Holdings, began operations on the revived Piraeus–Limassol route in June 2022 following an extensive refit in the floating dock operated by the Suez Shipyar...

NYK Line, Nihon Shipyard Co., Ltd. (NSY), ClassNK, and IHI Corporation (IHI) signed a joint research and development agreement for the commercialisation of an ammonia floating storage and regasification barge (A-FSRB). Specifically, the parties will work on the R&D of the world's first barge equipped with a floating storage and regasification facility for ammonia. Since ammonia does not emit carbon dioxide (CO2) when combusted, it is expected to be a next-generation fuel that contributes to...

The construction of a new supersize slipway and new workboat pontoons is now underway at Pembroke Port. It marks a big step forward in the realisation of the Port of Milford Haven’s vision for the Milford Haven Waterway to play a vital role in driving new green growth across the region, while supporting the country’s transition to a net zero future. The new slipway will provide maximum flexibility for the launch and recovery of marine energy devices and vessels, while the pontoons w...

Mark W. Barker, the first new U.S flagged Great Lakes bulker in almost 40 years, has successfully completed sea trials and will now begin trading throughout the freshwater lakes and river networks, with oil-free propeller shaft bearings from Thordon Bearings. Built in Sturgeon Bay, Wisconsin, United States of America (USA), by Fincantieri Bay Shipbuilding (Fincantieri Marine Group) for The Interlake Steamship Company, Thordon Bearings’ scope of supply includes a water lubricated RiverToug...

Rolls-Royce announces that Tufan Erginbilgic has been appointed Chief Executive Officer and an executive director of Rolls-Royce Holdings plc. Tufan will take up his new role on 1 January 2023, succeeding Warren East who, on 24 February 2022, announced his intention to step down at the end of this year. Tufan, who has a background in engineering, has built his career in international business including over 20 years with BP, with five years as part of its executive team. In his last role before...