WEG News
WEG and Eletrobras were present at CIGRE Paris 2024, where Engineer - Mateus Alexandrino, from the Transmission Department of the Vice-Presidency of Engineering and Expansion of Eletrobras, made a presentation about the reliability of protection, automation and control systems (PACS) associated with redundancy and system condition monitoring. WEG and Eletrobras partnership The work between WEG and Eletrobras addresses the modernisation process of the Itajaí substation, located in southe...
The American Gear Manufacturers Association (AGMA) is a non-profit trade association that represents the gear industry and seeks to promote the interests of manufacturers and suppliers of related equipment. The association offers its members a community for collaboration, knowledge exchange, and the development of new technologies. Increasing operational efficiency AGMA provides a platform for the development of technical standards, education, research, and advocacy Additionally, it promote...
In celebration of the 108th anniversary of the Institute of Engineering, Décio da Silva, Chairman of the WEG Board of Directors, received the title of Eminent Engineer of the Year 2024 at the award ceremony held yesterday (10th) in São Paulo. The ceremony, organized by the Engineering Institute, celebrated his successful trajectory and contributions to the industrial sector. The event was broadcast live on the Institute’s website and YouTube channel. Largest international p...
WEG, a pioneer in industrial solutions, recently completed the overhaul and recovery of a vertical mill gearbox at Cimento Tupi in Minas Gerais, Brazil. The service was carried out at WEG's plant in Sertãozinho, São Paulo. The gearbox, weighing more than 60 tons, drives Cimento Tupi's main mill, which has a nominal capacity of 300 tons per hour of flour. This critical equipment operates 24/7, making regular maintenance essential for continuous and safe operation. Electrical and m...
Environments with the presence of an explosive atmosphere, known as hazardous areas, require special care in the construction, installation and selection of electrical equipment to avoid the risk of explosion. Electric motors may become a source of ignition when operating in a hazardous environment. In order to prevent such risk, they must be designed with some specific characteristics that enable them to operate safely. The correct selection of the equipment, respecting the classificatio...
WEG has different laboratories in its structure for testing and evaluating the products it develops. WEG's electrical testing laboratory for motors within the power range from 0.10 kW to 400 kW and voltage up to 1000 V in Jaraguá do Sul/SC is one of them, annually audited by globally recognised organisations such as the Canadian Standards Association (CSA) and the Underwriter Laboratories (UL). This laboratory recently achieved accreditation under the ISO 17025 standard from the INMETRO...
WEG’s family of electronically commutated motors (ECMs) now has a wider power range with the release of the W30 Smart EC line. The W30 Smart EC was developed to solve different types of motor fan applications, such as exhaust and ventilation systems for poultry houses, parking lots, tunnels and industrial kitchens, where comfort and reliability are essential. The W30 Smart EC is an electric motor with an aluminium frame and IP55 protection rating, which means the...
With the aim of boosting Renewable Energy infrastructure in Chile, a significant global player in renewable energies, focused on the promotion, construction, and operation of power generation facilities from renewable sources, has partnered with WEG to acquire essential equipment for their project: a large-scale power transformer. WEG supplies large-scale power transformer The transformer will play a vital role in the wind farm's energy infrastructure, handling voltage regulation Destined for...
Steam turbines provide a valuable opportunity for many industries in South Africa to self-generate more of their power requirements often from alternative fuels produced as a by-product of their processes. This technology offers benefits including energy cost reductions, a more stable supply of power, and a lower carbon footprint. Generating steam for electricity A major South African firm taking advantage of these opportunities is Sappi Saiccor. Its mill at Umkomaas in Kwa...
The company has started producing medium voltage (MV) soft starters at one of its facilities in South Africa, reducing delivery times for customers and boosting local manufacturing. The SSW7000 soft starters are produced at WEG's manufacturing unit in South Africa, with high-efficiency standards. The SSW7000 line is well recognised in the market and widely used in pump and fan applications in the mining segment. WEG's soft starters With the growing demand for WEG's medium voltage soft start...
Small Hydroelectric Plants (SHPPs) are considered excellent renewable energy resources and represent around 3% of the Brazilian electricity matrix, representing 6.7 GW, according to the National Electric Energy Agency (ANEEL). In this important segment, WEG supplied two 5,226 kW Francis turbines and two 5,550 kVA generators. The equipment was installed at the Macacos SHPP, in Jaguariaíva, in the state of Paraná, Brazil, and operated by Pesqueiro Energia S.A. Turbines and generato...
The CEMIG standard Integrated Compact Substation (SECI) represents a transportable and versatile solution, designed to operate in high-voltage environments up to 138kV with medium-voltage outputs up to 34.5kV, fully assembled on a robust base of steel structures. WEG has been offering this solution for over 5 years, and since 2023 they have been manufactured at the modern factory in Betim, state of Minas Gerais, Brazil. Strengthening energy distribution Delivered fully assembled and commissio...
WEG has just released its Integrated Annual Report, highlighting its financial results, commitment to sustainability and innovation strategies in 2023. The company ended the period with around 40 thousand employees distributed across 52 manufacturing sites in 15 different countries. Achieved net revenue of 32.5 billion, reporting a solid year with consistent revenue growth. Reducing carbon emissions In the document, the company highlights its growing quest to maintain sustainability aligned w...
Focused on egg production since 1947, Granja Ueyama is constantly looking for innovative and efficient solutions to improve the company's operations. Located in the city of Bastos, São Paulo State, the farm counted on WEG Elétrica Luand to implement this energy efficiency project. Air moved by efficiency The W30 Smart EC, chosen to consolidate the partnership between Granja Ueyama and WEG, stands out as a key part of modernising the exhaust system in poultry faciliti...
WEG is supplying five 1000kVA, 15kV dry-type transformers to Eskimó Ice Cream industry, a prominent company in the ice cream and popsicle segment in the state of Santa Catarina, Brazil. The transformers will be used in the substation and are essential to support the increased production capacity, playing a significant role in the customer's electrical infrastructure. Dry-type transformers Dry-type transformers are equipment that use ambient air as a cooling medium Dry-type transformer...
The search for sustainable innovation, quality, and trust in everything WEG thinks and does resulted in the W23 Sync+. Efficiency ratings This new line offers the highest efficiency on the market, with synchronous electric motors that reach the IE5 rating. The low consumption of electrical energy due to their high efficiency also generates a positive balance for the environment, contributing to the reduction in CO2 emissions, in addition to having a much lower total cost of ownership because...
WEG has developed an innovative coating for use in highly corrosive environments, providing greater durability to assets and increasing the lifespan by up to four times compared to current technologies. This coating technology, already being tested and applied in some offshore platforms, replaces traditional coatings, simplifying equipment and structure maintenance where applied and offering significantly greater resistance compared to currently adopted protective plans. Offshore maintenance...
Potable water is a fundamental resource for humans, but it still poses a challenge to reach every location. For this process, lifting pumping stations play an important role in ensuring the raw water is delivered to the water treatment plants. Water and wastewater services Since 1971, Compesa (Companhia Pernambucana de Saneamento) has been working to provide water and wastewater services to the residents of the state of Pernambuco, Brazil. The company is involved in various projects coveri...
WEG announced to its shareholders and the general market that, as approved at an extraordinary meeting of the Board of Directors held on December 07, 2023, and following the succession plan of its Executive Team established, as from March 31, 2024, the following movements will be implemented: Within the succession planning, structured and conducted by the Board of Directors with the support of renowned consultancies, Mr. Harry Schmelzer Júnior will leave the position of Chief Executi...
WEG announced to its shareholders and the general market that, as approved at an extraordinary meeting of the Board of Directors held on December 07, 2023, and following the succession plan of its Executive Team established, as from March 31, 2024, the following movements will be implemented: Within the succession planning, structured and conducted by the Board of Directors with the support of renowned consultancies, Mr. Harry Schmelzer Júnior will leave the position of Chief Executi...
The month of November marked a significant moment for WEG, as it had the honour of receiving the Supplier Award from MWM, manufacturer of electric motors and generators of Grupo Tupy, standing out as one of the 11 best suppliers for the company. In a ceremony held on November 22nd, MWM acknowledged WEG's commitment and excellence in delivering high-quality solutions. The award assessed aspects such as quality, delivery performance, flexibility, technological capability, and the dev...
The month of November marked a significant moment for WEG, as it had the honour of receiving the Supplier Award from MWM, manufacturer of electric motors and generators of Grupo Tupy, standing out as one of the 11 best suppliers for the company. In a ceremony held on November 22nd, MWM acknowledged WEG's commitment and excellence in delivering high-quality solutions. The award assessed aspects such as quality, delivery performance, flexibility, technological capability, and the dev...
When Royal IHC, a pioneering Dutch supplier of vessels, equipment, and services for the maritime industry, sought to decarbonise its range of Beaver® cutter suction dredger (CSD) ships, it turned to WEG. Royal IHC’s step toward a more sustainable future was to develop an all-new fleet of electrically powered Beaver CSD vessels. But to power them, it needed a high-performance electric motor that suited the Beaver’s technical specifications. Royal IHC chose WEG’s WGM20...
As part of its effort to expand its presence in the East African markets, WEG is taking significant steps to increase its presence in Uganda through a partnership with Petrok as a Value Added Reseller (VAR). Petrok's local presence and technical expertise, along with the reliability of WEG products in the market, will facilitate this expansion. Strengthening position in Uganda The expected economic growth from projects like as the East African Crude Oil Pipeline (EACOP), along with the exis...
The Ashford Common water treatment plant, located in Surrey, England, is one of the largest water treatment plants in Europe. With a maximum output of approximately 7,870 litres of water per second, Ashford provides around a third of London’s water supply. This large plant has five axial-flow pumps driven by 7.5-ton electric motors, each capable of pumping about 2,083 litres of water per second. The plant pumps and stores raw water from large reservoirs to be treated later. WEG chosen to...
Internacional Marítima is a Brazilian company leader in marine and port support services, with over 35 years in the market and for over five years using WEG paints in its fleet. The vessel - BLG 2, originally destined to launch jack-ups of up to 8000 tonnes and reclassified to support work in ocean navigation, will be receiving a new paint job for restoration and protection in a 9,000 m² area of side, bottom and deck. WEG supplies paint for the vessel - BLG 2 WEG is supplying more...
The WEG electric motor production plant in Algeria has just been inaugurated on Tuesday, November 29, 2022, with the presence of the Minister of Industry, Ahmed Zeghdar, as well as H.E. the Brazilian Ambassador, Flavio Marega, in the Wilaya of Sétif, in line with the policy of the Algerian authorities. Indeed, this partnership between the CEVITAL and WEG groups is in line with the orientations desired by the Algerian government with the presidential decree N°67 of November 15, 2020,...
One of the largest pump companies in the world, headquartered in Texas, in the United States of America (USA), found in WEG the ideal solution to meet its needs. The supply is part of a steel plant project in the USA and includes 51 units of the new Vertical High Thrust motors line. This line represents the consolidation of the new design of vertical three-phase induction motors with high thrust capacity and non-reverse ratchet. Vertical High Thrust motor The Vertical High Thrust motor can be...
The development plan features the installation of a floating production, storage, and offloading (FPSO) vessel in offshore Brazil. This FPSO will have oil and gas processing capacities of 225,000 barrels per day and 12MMcm/d, respectively. SBM Offshore has been awarded for the lease and operation contract in July/2021. The platform will be deployed approximately 180 kilometres offshore Rio de Janeiro and the delivery of the FPSO is expected in the second half of 2024. Variable frequency drives...
SCAEK is a cement factory located near Setif, Algeria. The unit has WEG medium voltage motors installed, which are essential for the proper functioning of the production line. Upon detecting a failure presented by a motor that has been operating for years in the plant and, considering the fact that unscheduled stops can result in significant losses for production, the customer immediately contacted WEG, which quickly intervened to commission the spare motor, essential for these situations. W60...
Browse maritime news
- View more WEG products
- WEG Coatings