Wärtsilä Corporation News

Wärtsilä announces the release of their first dedicated methanol fuel supply system, MethanolPac

The globally renowned technology company, Wärtsilä (Wärtsilä Corporation) has developed a dedicated fuel supply system for methanol, MethanolPac, as interest grows in the methanol pathway to decarbonisation. Combined with the recently introduced Wärtsilä 32 Methanol engine and the company’s well-proven retrofit and system integration capabilities, MethanolPac enables Wärtsilä to deliver methanol-capable fuel and power systems, across a wide range of...

Wärtsilä Corporation secures new deal to install scrubbers on two newbuild RoPax vessels

The technology group, Wärtsilä (Wärtsilä Corporation) has secured a new agreement for its exhaust gas cleaning systems to be installed on two newbuild 218m roll-on/roll-off passenger vessels (RoPax) at Guangzhou Shipyard International (GSI) in China. V-SOx hybrid scrubber systems The contract, which was signed in February 2022, will see Wärtsilä fit and commission two 25-megawatt V-SOx hybrid scrubber systems, which can run in both open and closed loop configurati...

Wärtsilä to deliver power and electrical solutions for SeaRoad Shipping’s Australian RoRo newbuild vessel

The technology group, Wärtsilä (Wärtsilä Corporation) will supply main and auxiliary engines, fuel storage tanks, gas handling equipment and electrical systems for a new RoRo vessel being built for Australian-operator, SeaRoad Shipping. The orders with Wärtsilä Corporation were placed in Q1 2022. The 210 metre-long vessel is under construction at the Flensburger Schiffbau-Gesellschaft (FSG) shipyard in Germany. The vessel will operate primarily on LNG fuel. Wä...

Excitement, and big names, gathering for Nor-Shipping Ocean Leadership Conference

The removal of all national coronavirus restrictions in Norway added to easier international travel, is set to deliver a long-awaited gathering point for top industry leaders at Nor-Shipping’s Ocean Leadership Conference on 4 April. The event, which kickstarts four days of networking, knowledge-sharing, and showcasing innovation at Nor-Shipping 2022, will bring together over 900 executives for the first major ‘post pandemic’ summit of C-level maritime heads. Organisers say tha...

Wärtsilä to support sustainable operations on Viking Line’s new climate-smart flagship

The technology group Wärtsilä will provide technical management for a broad scope of solutions installed on Viking Line’s new climate-smart vessel Viking Glory under a three-year contract. The agreement was signed in December 2021. Minimising climate impact and optimising emissions Viking Glory currently begins its first commercial sailing. It features many cutting-edge technologies intended to minimise climate impact and air pollution. The new agreement covers s...

Wärtsilä hits Methanol milestone with first newbuild engine order

The technology group Wärtsilä has received its first order for newbuild methanol-fuelled engines. A new Offshore Wind Installation Vessel (WIV) being built for Dutch contracting company Van Oord at Yantai CIMC Raffles shipyard in China will be powered by five Wärtsilä 32 engines capable of operating with methanol. The order, which includes the methanol fuel supply system, was placed in November 2021, with delivery of the equipment scheduled for early 2023. Th...

Wärtsilä Corporation’s CEO, Håkan Agnevall highlights the key steps for the marine industry to transition to carbon neutral shipping

Håkan Agnevall, the Chief Executive Officer (CEO) at Wärtsilä (Wärtsilä Corporation), wants to position the marine and energy giant, as the natural partner for an industry and society, looking to translate climate ambition to reality. His vision is clear and he argues ahead of Nor-Shipping 2022, real change is already tantalisingly close at hand. It’s rare for someone to speak with such certainty in uncertain times. Clear path for Wärtsilä But, H&arin...

High efficiency Wärtsilä power solutions to drive seven new Arctic Shuttle Tanker vessels, being built at the Samsung Heavy Industries yard

The globally renowned technology group, Wärtsilä will supply the main and harbour engines for a series of seven new Arctic Shuttle Tanker vessels, which are being built at the Samsung Heavy Industries (SHI) yard, in South Korea. The order, which is valued at more than 100 million Euros, was placed with Wärtsilä, in December 2021. Wärtsilä 31DF dual-fuel engines The vessels will each feature six highly efficient Wärtsilä 31DF dual-fuel main engines, opera...

Wärtsilä gets selected to supply new LNG-fuelled container ships ordered by CMA CGM

The technology group Wärtsilä has again been selected to supply a broad scope of solutions for new LNG-fuelled container ships ordered by CMA CGM, a pioneer of shipping and logistics based in France. This latest series comprises 12 container vessels to be built in China. Six 13,000 TEU container vessels are being built at the Hudong-Zhonghua Shipbuilding (Group) CO. Ltd, with the other six 15,000 TEU container vessels under construction at the Jiangnan Shipyard (Group) Co., Ltd. The v...

Wärtsilä optimised maintenance agreement featuring digital solutions will enhance reliability and uptime for LNG Carrier

The technology group Wärtsilä has signed a long-term Optimised Maintenance Agreement with Singapore-based NYK Shipmanagement. The 13-year contract is designed to ensure maximum uptime and equipment reliability, with assured maintenance costs, for an LNG carrier vessel featuring three Wärtsilä 50DF dual-fuel engines. The agreement was signed in November 2021. The agreement covers maintenance and planning support. It includes Expert Insight, which enables dynamic, data-driven...

Wärtsilä completes the installation of a unique hybrid power system at M/V Paolo Topic

The technology group Wärtsilä has completed the installation and commissioning of a unique hybrid power system combined with a PV solar energy system in collaboration with Marfin Management and Solbian, onboard a bulk carrier vessel, making it one of the most technologically advanced vessel of its type in the global fleet. The installation was carried out on the M/V Paolo Topic, a bulk carrier built in 2016 at the Onomichi Dockyard in Japan and managed by Marfin Management S.A.M. The...

Wärtsilä wins order to supply cargo handling system for second LNG bunker vessel being built by Fincantieri Bay Shipbuilding

The technology group Wärtsilä will supply a new 103 metre (340 feet) long LNG Bunker Barge with a complete LNG cargo storage and handling system. The ship will be built at Fincantieri Bay Shipbuilding (“FBS”) in Wisconsin, USA for Polaris New Energy (PNE). This is the second of two such barges built at the yard for PNE, the same Wärtsilä solution having been ordered for both. The first barge is scheduled for delivery from FBS in December 2021. This late...

Wärtsilä thrusters to provide optimal propulsion performance for new wind turbine installation vessel

The technology group Wärtsilä will supply the seven thrusters required for a new Wind Turbine Installation Vessel (WTIV) being built at the Daewoo Shipbuilding & Marine yard in South Korea for Eneti Inc. By providing outstanding thrust, robust station-keeping capability, and efficient transit operation, the Wärtsilä thrusters will enable optimal propulsion performance for the vessel. The order with Wärtsilä was placed in October 2021. There is an option for a s...

Wärtsilä Voyage to equip the Technical University of Mombasa with cloud simulation services

Wärtsilä Voyage is to equip the Technical University of Mombasa (TUM) with Cloud Simulation services. This will make TUM the first African university to adopt cloud-based maritime training services. The contract was signed in November 2021 and the services will be implemented from January 2022 onwards. The Maritime Training Academy at TUM is a maritime education university in East Africa and this modern training technology will greatly help the Kenyan and other African seafarers to be...

Wärtsilä OPTI-DP engagement tool supporting the marine industry to configure optimised propulsion arrangements for DP vessels

The technology group Wärtsilä has introduced its latest development based on applied Computational Fluid Dynamics (CFD) modelling to enable the accurate and speedy configuration of thrusters and other propulsion systems, to deliver the optimal dynamic positioning solution.  The new Wärtsilä OPTI-DP Engagement Tool, which has been verified by DNV Maritime has been developed in response to the increasing need for efficient high-performance station keeping and manoeuvrabil...

Wärtsilä will supply an 8-megawatt (MW) / 32-megawatt hour (MWh) energy storage system to Colbun

The technology group Wärtsilä will supply an 8-megawatt (MW) / 32-megawatt hour (MWh) energy storage system to Colbun, one of the largest power generation companies in Chile, to accelerate its transition to renewable energy as the country targets carbon neutrality by 2050. This is Wärtsilä’s first energy storage project in South America. The order was booked to Wärtsilä order intake in Q3, 2021 and the system is expected to become operational in the fourth...

DNV and Nakilat JDP works to improve vessel software reliability and quality

Critical vessel functions rely heavily on computerised software-based systems that are becoming more complex, automated, and integrated. Software failures or reliability issues can now result in significant safety risks, as well as lost revenue due to off-hire days. To help address these risks, DNV and Nakilat brought together shipyards – DSME, Hudong-Zhonghua, HHI, and SHI, with system suppliers – ABB, Honeywell, Kongsberg, and Wärtsilä, to contribute to the development o...

Goltens completes installation of Woodward UG25+ P3 Governor on two Wärtsilä 9L20 engines

Goltens completed a retrofit of a mechanical Woodward 3161 Governor with the latest state-of-the-art electro-mechanical Woodward UG25+ P3 Governor on 2 Wärtsilä 9L20 engines. The new Governor has the same fit and provides the same functionality but with additional features to improve performance. The vessel is equipped with two variable speed Wartsila 9L20 propulsion engines each driving a propeller and fire pump. Each engine is equipped with a mechanical 3161 governor with pneumatic...

MSC Group to take part in a Sea Asia virtual panel session organised by Informa Markets

Bud Darr, Executive Vice President Maritime Policy and Government Affairs, MSC Group will be taking part in a Sea Asia virtual panel session, held as part of The Maritime Online Series, which is being organised by Informa Markets.   The Maritime Online Series is a month-long series of online events and specially produced content, running from 21 June to 22 July 2021. With a different theme each week, the series will cover a number of essential topics: Crewing, Regulation,...

Nor-Shipping to bring Ocean Now to deliver value, insights, analysis to the maritime industry

Ocean Now will also build excitement for Nor-Shipping 2022 – the first ‘winter’ Nor-Shipping, taking place 10-13 January in Oslo and Lillestrøm, Norway. “Originally, 1 June was set as the date of Nor-Shipping 2021, but, of course, the pandemic put paid to those plans,” comments Per Martin Tanggaard, Nor-Shipping Director. “So, we wanted to create something to help fill the gap left by the lack of physical gatherings, providing an event where the indust...

Goltens called on to replace liner on cylinder no.5 of a container ship featuring Wartsila 6RT-FLEX82C main engine

The crew of a nine year-old container ship, which is equipped with a Wartsila 6RT-FLEX82C main engine, observed exhaust gas blow-by on cylinder no.5, during normal operation and could not increase the load above 35%. The cylinder liner had 22,452 running hours and the crew suspected the cylinder liner was excessively worn and needed to be replaced. Liner replacement on cylinder no.5 The customer requested Goltens to attend and replace the liner with an onboard spare The customer requested G...

Wilhelmsen and Thyssenkrupp showcase the capabilities of their Additive Manufacturing (AM) service

The Wilhelmsen Thyssenkrupp AM fulfillment platform currently serves more than 3,000 vessels from key locations worldwide, addressing and solving some of the biggest pain points such as long lead time, part obsolescence, poor part performance and high carbon footprint, through on-demand manufacturing. Cooperating with several Original Equipment Manufacturers (OEMs), the venture is empowering OEMs to reduce their supply chain costs and improve customer experience, through increased serviceabilit...

Novenco awarded the contract of HVAC equipment with Lenin Fishing Company for a Wärtsila design 121 m Factory Trawler

Novenco announced that Novenco Norway/Russia has been awarded the contract for the design, supply and commissioning of HVAC Equipment with Lenin Fishing Company for a Wärtsila design 121 m Factory Trawler to be built at Yantar Shipyard in Kaliningrad, Russia. The project will be executed by Novenco’s office in Oslo, Norway. The HVAC equipment will be delivered during the second quarter of 2021. The vessel will be delivered in 2022.

Wilhelmsen's additive manufacturing service delivered CE-Certified 3D printed lifting tool for Wärtsilä

Manufacturing engines that power a third of the world’s largest cargo ships Wärtsilä often needs to fabricate specialist tools to solve problems and optimise efficiencies with its equipment onboard. The lifting tool is one such example. It is critical to building and servicing large engines, allowing engineers to move immensely heavy engine parts, such as pistons. The perfect partner Typically, such parts are both expensive and time-consuming to manufacture and deliver, and th...

vfd