Hempel Hempadur 47182 anti-corrosive, modified polyamide adduct cured epoxy
Technical Specification
- Make: Hempel
- Model code: Hempadur 47182
- Volume solids: 62 ± 2 %
- VOC content: 364 g/lt
- Flash point: 28 °C
High compatibility with old antifouling. Good corrosion resistance. Flexible application window. Hempadur 47182 is recommended for atmospheric and immersion service used as a tie-coat between epoxy and physically drying coatings. For immersion service it can replace one anti-corrosive primer coat for the underwater coating system and at the same time act as tie-coat for antifouling. It may also be used as a "sealer" for existing antifouling.
Read more| Make | Hempel |
|---|---|
| Manufacturer | Hempel A/S |
| Category | Operation and maintenance>Coatings |
| Model code | Hempadur 47182 |
| Volume solids | 62 ± 2 % |
| VOC content | 364 g/lt |
| Flash point | 28 °C |
| Specific gravity | 1.4 kg/L |
| Colour/ code | Light khaki brown 25150 |
| Finish/Sheen | Flat |
| Film thickness | 125 microns |
| Theoretical Coverage | (Recommended) 5 m²/litre |
| Additional info |
High compatibility with old antifouling. Good corrosion resistance. Flexible application window. Hempadur 47182 is recommended for atmospheric and immersion service used as a tie-coat between epoxy and physically drying coatings. For immersion service it can replace one anti-corrosive primer coat for the underwater coating system and at the same time act as tie-coat for antifouling. It may also be used as a "sealer" for existing antifouling. |
| Download PDF version Download PDF version | |
More Hempel Coatings
