MML Marine Watertight Hatch

Technical Specification

MML Marine Watertight Hatch Hatch cover
Features:
  • Make: MML Marine
  • Model code: Watertight Hatch
  • Cover plate thickness: 8 mm
  • Finish: SA2.5 and red oxide primer
  • Construction: Stainless steel
Additional info:

Watertight Hatch is manufactured from 8mm thick cover plate Suitably stiffened with weld on ribs Fitted with a 40 x 25 EPDM section perimeter seal Secured by 4 clamping points linked together Operated from above by a portable T key and below by a stainless steel central hand wheel Supplied with a channel section frame to leave the cover flush with the deck when fully closed. Suitable for welding directly to the structure. 2 off flush lifting points Shot blast SA2.5 after fabrication and primed one coat primer.

Make MML Marine
Manufacturer MML Marine
Model code Watertight Hatch
Cover plate thickness 8 mm
Finish SA2.5 and red oxide primer
Construction Stainless steel
Handwheel Yes
Additional info
  • Watertight Hatch is manufactured from 8mm thick cover plate
  • Suitably stiffened with weld on ribs
  • Fitted with a 40 x 25 EPDM section perimeter seal
  • Secured by 4 clamping points linked together
  • Operated from above by a portable T key and below by a stainless steel central hand wheel
  • Supplied with a channel section frame to leave the cover flush with the deck when fully closed.
  • Suitable for welding directly to the structure.
  • 2 off flush lifting points
  • Shot blast SA2.5 after fabrication and primed one coat primer.