MAVI DENIZ Sweeping Arm 350 Oil Skimmer

Technical Specification

Features:
  • Make: MAVI DENIZ
  • Model code: Sweeping Arm 350
  • Type: Brush/Weir
  • Oil recovery/ Capacity: 350 m3/hr
  • Mode of operation: Hydraulic
Additional info:

Rigid Construction, MAVI DENIZ Sweeping Arm Skimmer employs a rigid concentrating guide boom construction, attaches alongside the response vessel. A  weir skimmer or brush skimmer can build into the arm at the ‘V’ apex next to the ship hull. A pump transfers recovered oil and water to onboard tanks, then the separation of the mixture can proceed. High Performance, equipped with the most efficient hydraulic-driven submerged active Archimedes screw pumps, MAVI DENIZ Sweeping Arm Skimmer   System can recover any floating pollutant. Those which does not pass through the pump inlet can be recovered downstream from the “grating door.” A high-pressure steam system can adapt to liquefy thick oils at the pump inlet and outlet for oil with high viscosity. Easy To Display, MAVI DENIZ Sweeping System is mobile and easily stored and transported. Only a small number of people are needed to put the MAVI DENIZ Sweeping Arm into operation. Since the system is a self-floating device, almost any seagoing vessel with sufficient recovery capacity and power can host the system. Experience in anti-pollution transformation vessels, MAVI DENIZ engineering, and design department can answer any optional request.

Make MAVI DENIZ
Manufacturer MAVI DENIZ A.S
Model code Sweeping Arm 350
Type Brush/Weir
Oil recovery/ Capacity 350 m3/hr
Mode of operation Hydraulic
Remote control Yes
Portable Yes
Additional info

Rigid Construction, MAVI DENIZ Sweeping Arm Skimmer employs a rigid concentrating guide boom construction, attaches alongside the response vessel. A  weir skimmer or brush skimmer can build into the arm at the ‘V’ apex next to the ship hull. A pump transfers recovered oil and water to onboard tanks, then the separation of the mixture can proceed.

High Performance, equipped with the most efficient hydraulic-driven submerged active Archimedes screw pumps, MAVI DENIZ Sweeping Arm Skimmer   System can recover any floating pollutant. Those which does not pass through the pump inlet can be recovered downstream from the “grating door.” A high-pressure steam system can adapt to liquefy thick oils at the pump inlet and outlet for oil with high viscosity.

Easy To Display, MAVI DENIZ Sweeping System is mobile and easily stored and transported. Only a small number of people are needed to put the MAVI DENIZ Sweeping Arm into operation. Since the system is a self-floating device, almost any seagoing vessel with sufficient recovery capacity and power can host the system. Experience in anti-pollution transformation vessels, MAVI DENIZ engineering, and design department can answer any optional request.