Recommended use Hempel's Nexus II 27400 is used as a sealer/tie-coat for the Hempaguard®/Hempasil systems. Maintenance, Antifouling systems: The product is designed for the purpose of recoating old antifouling systems with a Hempaguard®/Hempasil topcoat, creating a link between the existing antifouling system and the Hempaguard®/Hempasil topcoat. This is feasible provided the general condition of the old antifouling system is good. Maintenance/New Build, Full system: The product is designed to be used as a bridging tie-coat between approved anticorrosive primers and Hempaguard®/Hempasil topcoat. Used in combination with Hempasil Nexus X-Tend 27500 for full coat applications of the Hempaguard®/Hempasil topcoats. Minimum curing temperature for this system is 0°C [32°F].
| Make | Hempel |
|---|---|
| Manufacturer | Hempel A/S |
| Model code | Nexus II 27400 |
| Volume solids | 56 ± 2 % |
| VOC content | 388 g/lt |
| Flash point | 24 °C |
| Specific gravity | 1.4 kg/L |
| Colour/ code | Light grey 11070 |
| Finish/Sheen | Semi-flat |
| Film thickness | 100 microns |
| Additional info |
Recommended use Hempel's Nexus II 27400 is used as a sealer/tie-coat for the Hempaguard®/Hempasil systems. Maintenance, Antifouling systems: The product is designed for the purpose of recoating old antifouling systems with a Hempaguard®/Hempasil topcoat, creating a link between the existing antifouling system and the Hempaguard®/Hempasil topcoat. This is feasible provided the general condition of the old antifouling system is good. Maintenance/New Build, Full system: The product is designed to be used as a bridging tie-coat between approved anticorrosive primers and Hempaguard®/Hempasil topcoat. Used in combination with Hempasil Nexus X-Tend 27500 for full coat applications of the Hempaguard®/Hempasil topcoats. Minimum curing temperature for this system is 0°C [32°F]. |