An ultra-high solids and very low VOC epoxy coating Has good self-priming properties and is suited for application even under humid conditions and on marginally prepared surfaces Treated areas, e.g. ballast tanks, can quickly be reimmersed and put back into service. Time to ballast: 8 hours at 20°C [68°F] Recommended for small areas difficult to access, where climate control and surface preparation is difficult, especially recommended for onboard maintenance and spot repair in e.g. water ballast tanks and on decks Can be used on moist surfaces under conditions of 100% relative humidity Damp surface tolerance Fast re-immersion Ultra high solids Very low VOC Markets and application : Marine/Marine seastock
| Make | Hempel |
|---|---|
| Manufacturer | Hempel A/S |
| Model code | Hempadur EM 35740 |
| Volume solids | 97 ± 2 % |
| VOC content | 52 g/lt |
| Flash point | 33 °C |
| Specific gravity | 1.3 kg/L |
| Colour/ code | Light Green 47960 |
| Finish/Sheen | Semi-Gloss |
| Film thickness | 150 microns |
| Theoretical Coverage | 6.5 m²/litre |
| Additional info |
|