CM Technologies WTK-CT-85055 Chlorination Test Kit

Technical Specification
Features:
  • Make: CM Technologies
  • Model code: WTK-CT-85055
  • Measurement range: 0 ~ 1 PPM
Additional info:

Enables to complete the disinfection process correctly and maintain chlorination levels The chlorine HR test is used to check that chlorine has been dosed to the correct levels and the starch/ potassium iodide strips are used to make sure the chlorine has been neutralized The chlorine LR test is then used to check that chlorine reserves are kept to the maximum permitted level The pH test strips are used to check that pH values are between 5 -6 pH during chlorination The pH should be carefully monitored because acidic pH solutions below 4 can cause the release of chlorine gas which is toxic When using chlorine as a disinfectant it is important that the pH be 5 - 6 to improve its bacteria reducing properties

Make CM Technologies
Manufacturer CM Technologies GmbH
Model code WTK-CT-85055
Measurement range 0 ~ 1 PPM
Additional info
  • Enables to complete the disinfection process correctly and maintain chlorination levels
  • The chlorine HR test is used to check that chlorine has been dosed to the correct levels and the starch/ potassium iodide strips are used to make sure the chlorine has been neutralized
  • The chlorine LR test is then used to check that chlorine reserves are kept to the maximum permitted level
  • The pH test strips are used to check that pH values are between 5 -6 pH during chlorination
  • The pH should be carefully monitored because acidic pH solutions below 4 can cause the release of chlorine gas which is toxic
  • When using chlorine as a disinfectant it is important that the pH be 5 - 6 to improve its bacteria reducing properties